Counter-Strike 2

Prime account farm

Turnkey server setup for Counter-Strike 2 Prime account farms, built on Proxmox vGPU.

Proxmox vGPU
Windows VMs

Activity

Deposits, setups and refunds.

Setup server

connect a Proxmox host

SSH ACCESS
ADD OUR KEY ON THE SERVER

Run this once on the server as root — then no password is needed:

loading key…
Setup cost one-time · per server —

Server requirements

check before submitting

Dedicated server

The disk gets repartitioned — it must hold no data you need.

NVIDIA GPU with vGPU

Tesla/V100/A-series natively; 1080Ti/2080/3090 via unlock. AMD/Intel won't work.

VT-d / IOMMU enabled in BIOS

Intel VT-d or AMD-Vi. Turn Secure Boot off.

Proxmox VE 8.x installed

Got Debian 12 instead? Tell us — we can convert it.

Internet + open SSH

Root login, port reachable from outside.

Enough disk & RAM

~110 GB and ~8 GB RAM per VM. We compute the VM count ourselves.

Full guide

from prep to first login

We turn your bare GPU server into a fleet of ready-to-use Windows PCs — each with its own GPU, licensed and reachable over Remote Desktop from anywhere. Here's the whole flow.

1

What you get

Multiple Windows PCs

We size the fleet to your hardware — typically one VM per ~8 GB of GPU memory.

A real GPU in each

vGPU-backed, licensed and tuned — ready for CS and other GPU workloads.

Remote Desktop access

Connect from Windows, Mac or phone with a single login and password.

2

What your server needs

Dedicated server

The disk is repartitioned during setup — keep nothing you need on it.

NVIDIA GPU with vGPU support

Tesla / V100 / A-series natively; 1080 Ti / 2080 / 3090 via unlock. AMD and Intel GPUs won't work.

VT-d / IOMMU on, Secure Boot off

Intel VT-d or AMD-Vi enabled in BIOS.

Proxmox VE 8.x

Only have Debian 12? Tell us — we can convert it for you.

SSH reachable from outside

Root access on a port we can reach over the internet.

Room to run

~110 GB disk and ~8 GB RAM per VM. We compute the count automatically.

3

Prepare your server

  1. 1
    Install Proxmox VE 8.x

    Or send us a fresh Debian 12 — we'll convert it.

  2. 2
    Enable VT-d / IOMMU in BIOS

    And turn Secure Boot off while you're there.

  3. 3
    Open SSH from the internet

    Make sure root can log in on a reachable port.

  4. 4
    Back up your data

    The disk gets wiped and repartitioned — save anything you need first.

4

Run the setup

Open the Set up a server form, enter your host and access details, and submit. From there it's fully automatic:

  1. ·
    Compatibility check

    We verify the GPU, virtualization and disk before charging anything. If it can't work, you pay nothing.

  2. ·
    Build & license

    We deploy the image, create the VMs, license each GPU and wire up Remote Desktop.

  3. ·
    Track progress

    Watch it live on the Status tab — usually 15–25 minutes.

If setup fails, the charge is refunded to your balance automatically.
5

Billing

Setup is prepaid from your balance — the price on the Begin setup button per server. Top up in the Wallet tab (crypto, USDT-TRC20); your balance updates automatically once payment lands.

6

Connect after setup

  1. 1
    Install a Remote Desktop app

    Built into Windows (mstsc); Windows App on Mac; Remote Desktop by Microsoft on phone.

  2. 2
    Enter the PC address

    We send each PC's IP:port in the “Done” message.

  3. 3
    Log in

    User Administrator and the password we send — the same one for all PCs.

7

Need help?

Open a ticket from the Support tab — we reply right inside the app.

Activity

Deposits, setups and refunds on your account.

No activity yet

Status

Your servers and their setup progress.

No servers yet

Profile

TELEGRAM Telegram user connected account
BALANCE $0.00
connected

Balance

EvoriVM account

AVAILABLE $0.00
TOP-UP AMOUNT min $1 · max $5000

Support

one open ticket per user

Send your first message to open a support chat.